Introduction
Vacuum pool cleaners are a great way to keep your swimming pool clean and sparkling. This guide will teach you how to use a vacuum pool cleaner and keep your pool looking great!
Vacuum cleaners for pools
If you own a pool, then you know that keeping it clean is a top priority. One way to do this is to use a vacuum cleaner to clean the pool tiles and surrounds. Here are some of the Vacuum cleaner Supplier tips on how to use a vacuum cleaner for pools:
- Always read the manufacturer's instructions before using your vacuum cleaner. These instructions will tell you how much pressure to use and which surfaces to clean.
- When cleaning the pool floor, be sure to use the correct tool for the job - a pool brush or a vacuum cleaner with a suction wand. Different types of flooring require different cleaning methods.
- To clean the sides and bottom of the pool, use a bucket and spade. Scoop up water and debris, then dump it into the bucket. Clean around the edges of the pool with the spade, then rinse off the tool and bucket.
- To clean the diving board, steps and rails, use a hose attachment on your vacuum cleaner. Point the nozzle at one end of each object, then turn on the water flow and wait until the suction has pulled all of the debris into the hose. Disconnect the hose from the vacuum cleaner, then rinse off everything
Types of vacuum cleaners for pools
If you’re thinking of buying a vacuum cleaner for your pool, there are a few things to consider.
What type of pool is it? A pet pool will require a different type of vacuum cleaner than an inground pool. Also, be sure to read the reviews and compare prices before you buy.
Pets vs. people: Pets shed hair all over the place, while most people only sweat a little bit. Pets also leave behind dirt and other debris that a traditional vacuum cleaner may not be able to pick up. For these reasons, most pet vacuums are designed specifically for small animals and don’t work well on larger pools or patio furniture.
Suction power: Most standard Handheld vacuum cleaners have suction power rated at 0.25 amps or less. This means they can only clean small areas at a time and won’t be able to suck up large chunks of debris like a pool cleaner with a higher amp rating can. If your pool is very dirty or has lots of leaves and other detritus stuck in the filaments, you’ll need to invest in an vacuum cleaner with higher suction power.
Weight and portability: Not all vacuum
image source: https://www.pinterest.ph
How to use a vacuum cleaner for pools?
In order to clean a pool with a Wet&Dry vacuum cleaner, you will need to follow these simple steps:
1. Locate the pool ladder.
2. Put on your swimming gear and climb up the ladder.
3. Turn on the vacuum cleaner and wait for it to reach full power.
4. Place the suction cup around the edge of the pool and slowly move it around the entire perimeter of the pool.
5. Empty the vacuum cleaner's contents onto the ground near the edge of the pool and rinse off the hose with water.
6. Replace the suction cup around the edge of the pool and climb down from the ladder.
Note: You may also want to use a broom or leaf blower to clean smaller areas around pools before using a vacuum cleaner as this will save time and energy.
image source: https://www.pinterest.ph
Conclusion
Vacuum pool cleaners are a great way to keep your pool clean and tidy. By using a vacuum cleaner, you can get rid of all the debris that build up over time, making it easy to keep your pool looking its best. Plus, by using a vacuum cleaner you won’t have to deal with any messy pools or scrubbing the bottom of the pool for hours on end. If you’re ready to invest in a vacuum pool cleaner, be sure to check out our selection here at The Home Depot!