Parental control is a feature developed in recent years which allows parents to restrict things off the internet for their children. Web contains everything there is to know but that information should be delivered and accessed at right time. Therefore, devices have parental control. Netgear has arental controls which allows you to block certain things from the router itself. This way you do not have to go through the trouble of configuring every internet device in the house. But sometimes you find Linksys parental controls not working. It usually happens because of outdated firmware version of the router. Another reason can be if you use the router in the bridge mode. In order to fix the problem. You can visit the official website of Linksys router and check for updates. Then, click on router upgrade option. Click on the firmware you downloaded to install it. You can also try some of the Linksys router troubleshooting ways to resolve the error. Let’s have a look at some of the steps. Steps to resolve Linksys router errors: Restart your router and your computer to see of the connection is restored. The internet light on the modem should be on. All the cables should be attached properly. Remove any extensions and directly connect them to the power source. Go to the log in page and check for firmware updates. Reset the router using the reset button at the back of the router. The router should be placed on a smooth platform. Try restarting the router. Restart the connected devices once to see if that solves the problem. Contact your internet service provider about the server issues. Follow the steps mentioned above and the working of the router should be restored but you may also encounter Linksys Re6300 not resetting. It can be due to entering wrong credentials if you are performing the reset through web interface. Another cause can be a faulty button Or the router, in that case you must contact a technical expert. There after, you can complete the process of setup Linksys AC1200. Here are the steps for the same. Connect the router through an Ethernet cable. Open a web browser in a connected device. Now, type routerlogi.com or 192.168.0.1 in the URL section. Enter the default credentials in the login page. The user name is admin and the password is word spelled password. You can then navigate to settings and configure the router. Source